Classic Incubators, Clifton
£1,926.00 – £9,953.00 (Excluding VAT at 20%)
Description
Clifton Incubators feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5°C to 100°C with timer functions.
These Incubators can run at set temperature immediately, use run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.
The chamber is constructed from high-quality stainless steel, lagged with high-efficiency thermal insulation, all contained within an outer steel housing with anti-bacterial paint finish.
With energy efficiency in mind, particular attention is paid to robust design, insulation, a tight door closure with silicone seal and hinge design to maintain chamber temperatures with intelligent temperature control.
Product Specifications
- Gravity convection up to 100% fan speed convection withiin chamber
- Digital LED display PID temperature control ambient +5°C to 100°C with 0.1°C resolution
- pt100 3 wire class b sensor
- Auto over temperature alarm
- Timer settings variable 00:01 to 99:59 hh:mm
- Single insulated door, lockable latch lever operation, with 2 point door engagement for an even compression to chamber seal
- Incubator chamber insulation features low thermal conductivity 0.06 reducing energy consumption
- Anti-bacterial external painted surfaces, fitted with adjustable feet
Controls
- Featuring bold illuminated LED display of measured temperatures in real-time, in increments of ±0.1°C with intuitive to use controls, utilising touch sensitive keypads. Indicators for heating, timers and alarm.
- On/off power switch.
- Exhaust air flap is dial adjustable from 0 to 100% for chamber venting.
- Fan chamber convection variable from 0% to 100%. Fan convection improves temperature uniformity and heating recovery time.
- Door, lockable with 2 point door engagement for an even seal.
- On left hand side the Oven features a 35mm diameter Access port, with perforated flap cover, to reduce heat losses when used with external probes.
Safety and Warranty
- Switching on, the controls undergo an automatic diagnostic check.
- Features a temperature sensor fail alarm with error reporting on LED screen.
- Over temperature alarm is automatically set 5°C above set point.
- Door open heating is interrupted, after a short delay a door sounder chimes until door closed, heating resumes.
- Fitted with Class 1 over temperature thermostat for overall unit protection.
- 2 year warranty
Product Contact Form
You must be logged in to post a review.
Please contact us for lead time information
Reviews
There are no reviews yet.